Balcrank LYNX 5:1 HD Bare Carbon Steel Stub Pump with Bung Adapter 1110-012

LYNX 5:1 HD Pump

The LYNX® 5:1 HD ratio double-acting pump is engineered for outstanding performance and reliability. The LYNX® 5:1 HD pump is designed to dispense lubricating oils and gear oils in piped systems up to SAE 90.

The LYNX® 5:1 HD series pump is perfect for medium-volume users requiring an economy unit for roll-around synthetics, gear oil, and standard mineral oil dispense packages. This pump can also be used for small to medium shops supplying overhead hose reels with a maximum overall flow rate of 5 gpm.

NOTE: Thermal expansion of the fluid in a distribution system can cause an increase in system pressure that can damage lubrication system components. Use pressure relief valve kit included with this pump.

• (1) Ensure that all hose fittings and piping are rated for fluid outlet pressures. Balcrank recommends a minimum of 3x safety factor.

Warning! Do not use any LYNX® series products with flammable fluids.
Verify fluid compatibility with MSDS sheets.
Contact Balcrank for specific system design performance and technical data.

Specifications

• Operating air pressure: 60-145 psi (4-10 bar)
• Cycles per gallon: 20 cyc/gal (5.28 cyc/liter)
• Air consumption: 100 psi (7 bar) & 3 gal/min (11 l/min): 18.80 SCFM
• Max Fluid stall pressure @ 150 psi (10 bar): (1)725 psi (50 bar)
• Effective Air Piston Diameter: 3” (80 mm)

Free Flow Pump Delivery

• With SAE 10W30 oil, 68º F (20º C), 150 psi (10 bar) air pressure: 24 gal/min (90.85 l/min)

Connections

• Air inlet: 1/4” NPT(F)
• Fluid inlet: 1” NPT(F)
• Fluid outlet: 3/4” NPT(F)

Wetted Materials

• Aluminum, Buna-N™, Zamak, Steel, and Polyurethane

Service Bulletin

• SB 1128